Loading Sill Lowering Control Head -E682- /Power Pivoting Trailer Hitch Button -E474-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Using a narrow screwdriver at the opening -arrow A- release the cap and at the same time push on the bottom slightly upward -arrow B-.
-- Remove the cap.
-- Remove the bolt -2-.
-- Pivot out the button trim -1- from the mount in direction of -arrow C-.
-- Disconnect the connectors.
-- Release the retainers in direction of -arrows-.
-- Remove the loading sill lowering control head -2- from the trim -1-.