LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (Interior Lights, Switches) >> 96 Interior Lights, Switches >> Cigarette Lighter And Socket >> 12 V Socket 4 -U20-, REPLACING >> Removing

12 V Socket 4 -U20-, REPLACING: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 12 V Socket 5 -U26-
GWWA90-10090Courtesy of AUDI

-- The release tabs -2- on the Cigarette Lighter Release Tool:T40148  must engage in the 12 V socket openings -3- in direction of -arrow-. To do so, the threaded rod -1- must be slid all the way down.

-- Open the mount cover -2- and hold it in that position.

Fig 2: Identifying Piston -2- And Release Tabs -1
GWWA90-10097Courtesy of AUDI

-- Slide the Cigarette Lighter Release Tool:T40148  all the way into the 12 V socket -3-.

-- Turn the thumbwheel -1- on the Cigarette Lighter Release Tool:T40148  clockwise all the way to the end stop.

-- Remove the 12 V socket from the luggage compartment side trim panel.

-- Disconnect the connector.