Overview - Windshield Projection (Head-Up Display), From Product Improvement

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Windshield Projection (Head-Up Display)

Courtesy of AUDI

Instrument Panel Crossmember
Nut
- 8 Nm
- Quantity: 3
Exterior Bracket
- For windshield projection control module
- Removing and Installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING, FROM PRODUCT IMPROVEMENT .
Bolt
- Tightening specification and sequence. Refer to Fig 2.
- Quantity: 2
Instrument Panel
Upper Cover
- Removing and Installing. Refer to OVERVIEW - INSTRUMENT PANEL
Windshield Projection Head Up Display Control Module -J898-
- Removing and Installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING, FROM PRODUCT IMPROVEMENT .
- Calibrate the windshield projection control module. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, CALIBRATING, FROM PRODUCT IMPROVEMENT .
Bolt
- Tightening specification and sequence. Refer to Fig 2.
Bolt
- Tightening specification and sequence. Refer to Fig 2.
- Quantity: 2
Interior Bracket
- Removing and Installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING, FROM PRODUCT IMPROVEMENT .
- For windshield projection control module
Nut
- 8 Nm
- Quantity: 3

Windshield Projection Head Up Display Control Module - Tightening Specification and Sequence

Fig 2: Windshield Projection Head Up Display Control Module - Tightening Sequence

Courtesy of AUDI

-- Tighten the bolts in the sequence shown.

Bolts	Tightening Specification
-1-	5.5 Nm
-2 and 3-	4 Nm