LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (Air Conditioning (Refrigerant R134A Servicing) (Pressures Checking)) >> 87 Air Conditioning >> Pressures, Checking >> Pressures, Checking, Vehicles With Expansion Valve And Receiver/Dryer, Internally Regulated A/C Compressor >> Notes

Pressures, Checking, Vehicles With Expansion Valve And Receiver/Dryer, Internally Regulated A/C Compressor: Notes

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Connect the A/C service station. Refer to A/C SERVICE STATION, CONNECTING .

Observe the test requirements. Refer to PRESSURES, CHECKING .

-- With the ignition switched off, check the pressures in the refrigerant circuit (using the A/C service station). Refer to Refer to REFRIGERANT CIRCUIT, CHECKING PRESSURE WITH SERVICE STATION .

The pressures with the ignition turned off meet the specifications.

-- Start the engine.

-- Bring the engine speed up to 2000 RPM.

-- Observe the pressure gauge of the A/C service station.

NOTE:

Switching pressures and design of refrigerant circuit switches are vehicle-specific.

Pressures must be measured at the service connections; the component location for these connections are vehicle-specific. Refer to Refrigerant Circuit (vehicle-specific service information).