LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Wheels, Tires, Wheel Alignment (Wheel Changing - Temporary Spares)) >> 44 Wheels, Tires, Wheel Alignment >> Tire Wear >> Permitted Differences In Tread Depth >> Models With Horizontally Installed Engine

Models With Horizontally Installed Engine

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Tread depth difference on models with horizontally installed engine, such as A3, TT, Q3, A1...

Here the average difference between the front and rear axle must not be greater than 3 mm.

Average at front axle 2.0 mm

Average at rear axle 4 mm

Difference of front axle to rear axle 2 mm

Within the permissible tolerance of 3 mm

scientia non olet · About LEMON Manuals