Valve, Removing And Installing, Rubber Valve
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Make sure wheel rim is clean.
-- Using the Valve Fitting Tool:VAS6459 -1-, insert a new tire valve.
-- Remove the valve insert.
-- Inflate the tire to approximately 3 to 4 bar (43.51 to 58.02 psi); the tire bead must slip audibly over the rim hump when doing this.
-- Install the valve insert.
-- Fill the tire to the specified pressure.
CAUTION:
Do not screw any aluminum valve caps onto steel valve bodies. Aluminum caps attach to the steel valve body into a inseparable connection and cannot be separated again.
-- Balance the tire.