Vacuum Pump, Removing And Installing, Vehicle With 4.0L TFSI Engine: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Check the vacuum line/hose for damage before assembling and replace if necessary.
-- Position the vacuum pump driver -1- so it engages in the symmetrical groove on the camshaft when positioning -arrows- (example illustration).
-- Install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .