Brake Lamp Switch, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Clean the contact surface -1- for the Brake Lamp Switch -F-.
- The brake lamp switch must be between the two edges -arrows- of the brake master cylinder.
-- Insert and close the service door in the plenum chamber cover.
- Make sure the brake lamp switch is working correctly before driving the vehicle for the first time.