Fuel Tank Leak Detection Module -GX36-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right rear wheel housing liner. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Release and disconnect the connector -2-.
-- Remove the bolts -arrows-.
-- Remove the Fuel Tank Leak Detection Module -GX36- -3- with hose -4- and bracket -1-.
-- Loosen the hose clamp -6- and remove the vent hose -4- from the filter -5-.
-- Remove the bolt -4-.
-- Remove the bolts -arrows- and remove the bracket -1-.
-- Loosen the hose clamp -2- and remove the vent hose -3-.
-- Remove the hose -2- from the Fuel Tank Leak Detection Module -GX36- -1- -arrow A-.
-- Push the releases together for this -B arrows-.