Radiator, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- If there are small impressions on the slats, refer to the appropriate service information. .
- If the catches are damaged, the radiator for the coolant must be replaced.
- Used coolant cannot be used again.
-- Install the impact member. Refer to the appropriate service information. .
-- Install the headlamp housing with mount. Refer to HEADLAMP, REMOVING AND INSTALLING .
-- Connect the coolant hose and connections with the connector coupling. Refer to Figure.
-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING .