Coolant Expansion Tank, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Lift the clamp -2- and remove the breather line -3-.

-- Remove the bolts -arrows-.

-- Remove the coolant expansion tank upward from the bracket -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the connector -1- for Engine Coolant Level Sensor -G32- and disconnect.

-- To catch the coolant, place a suitable drip tray under the coolant expansion tank.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the coolant hose -5- with Hose Clamps - Up To 25mm :3094 .

-- Lift the clip -4-, remove the coolant hose -5- and allow the coolant to drain.

-- Remove the coolant expansion tank.