Coolant Pipes On SUBFRAME, Transmission And Body

WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

The marking on the coolant pipes and ends of coolant hoses must align.

Fig 1: Exploded View Of Coolant Pipes On Subframe, Transmission And Body

Courtesy of AUDI OF AMERICA, LLC

Right Front Coolant Pipe in Wheel Housing
- Removing and installing. Refer to RIGHT FRONT COOLANT PIPE IN WHEEL HOUSING, REMOVING AND INSTALLING .
Bolt
- 8 Nm
Spacer Sleeve
Rubber Bushing
Flange Nut
- 8 Nm
Nut
- 8 Nm
Double Bolt
- Tightening specifications. Refer to OVERVIEW - SUBFRAME .
Left Coolant Pipe on Subframe
- Removing and installing. Refer to LEFT COOLANT PIPE ON SUBFRAME, REMOVING AND INSTALLING .
Bolt
- 8 Nm
Rubber Bushing
Spacer Sleeve
Bolt
- 8 Nm
Coolant Pipe to Lock Carrier
- Removing and installing. Refer to COOLANT PIPE TO LOCK CARRIER, REMOVING AND INSTALLING, VEHICLES WITHOUT AUXILIARY RADIATOR FOR TRANSMISSION FLUID COOLING .
Rubber Bushing
Spacer Sleeve
Bolt
- 8 Nm
Nut
- 5 Nm
Right Rear Upper Coolant Pipe on Longitudinal Member
- Removing and installing. Refer to RIGHT REAR COOLANT PIPES ON LONGITUDINAL MEMBER, REMOVING AND INSTALLING .
Nut
- 5 Nm
Nut
- 5 Nm
Right Rear Lower Coolant Pipe on Longitudinal Member
- Removing and installing. Refer to RIGHT REAR COOLANT PIPES ON LONGITUDINAL MEMBER, REMOVING AND INSTALLING .
Right Coolant Pipe on the Transmission
- Removing and installing. Refer to RIGHT COOLANT PIPE ON TRANSMISSION, REMOVING AND INSTALLING .
Bolt
- 8 Nm
Bolt
- 8 Nm