LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (Cooling System (8-Cylinder Direct Injection 4.0L 4V TFSI Engine Ea825)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Right Front Coolant Pipe, Removing And Installing >> Removing

Right Front Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the starter generator. Refer to GENERATOR, REMOVING AND INSTALLING .

-- Loosen the hose clamp -2- and remove the coolant hose.

GWWA19-13241Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and the coolant pipe -1-.