Ignition Coils, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model preliminary work may be required. Refer to IGNITION COIL, REMOVING AND INSTALLING .

-- Insert the Puller:T10530 in the ignition coil opening -1-.

Fig 1: Identifying Puller T10530

Courtesy of AUDI OF AMERICA, LLC

-- Turn the knurled nut -2- clockwise -arrow- until the puller is clamped.

-- Remove the ignition coil carefully vertically -arrow- using the Puller:T10530 .

Fig 2: Identifying Puller T10530

Courtesy of AUDI OF AMERICA, LLC