LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Turbocharger, Supercharger (Servicing - 8-Cylinder 4.0L 4V TFSI Engine Ea825)) >> 21 Turbocharger, Supercharger >> Turbocharger >> Oil Lines On Turbocharger, Removing And Installing >> Oil Supply Lines On Turbocharger, Removing And Installing >> Removing

Oil Supply Lines On Turbocharger, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the upper coolant lines on turbocharger. Refer to UPPER COOLANT LINES ON TURBOCHARGER, REMOVING AND INSTALLING .

Engine codes DWKA/DWLA/DWNB/DWPA/DWRB:

-- Remove the right turbocharger. Refer to TURBOCHARGER, REMOVING CYLINDER BANK 1 (RIGHT), ENGINE CODES DWKA/DWLA/DWNB/DWPA/DWRB .

All Engine Codes:

-- Remove the oil filter element. Refer to ENGINE OIL .

-- Remove the bolt -arrow-, remove the oil supply line -1- and remove.

GWWA17-11247Courtesy of AUDI OF AMERICA, LLC