Refrigerant Lines, Removing And Installing, From Connection Point To Rear Expansion Valve: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition.
-- Discharge the refrigerant circuit. Refer to Refrigerant Circuit or A/C SERVICE STATION, USING .
-- Remove the refrigerant lines from the rear expansion valve. Refer to REAR EXPANSION VALVE, REMOVING AND INSTALLING .
-- Remove the nut -E-, release the catch -arrow- and open the bracket.
-- Release the retainers and open the cable holder -F-.
-- Remove the bolt -D-.
-- Remove the refrigerant lines to the rear expansion valve -A and C- from the refrigerant lines -B- and to the front heater and A/C unit.