Preliminary Work For Replacing Belt Pulley

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition.

-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the ribbed belt from the A/C compressor belt pulley. Refer to RIBBED BELT, REMOVING AND INSTALLING - 2.0 or RIBBED BELT, REMOVING AND INSTALLING - 3.0 .

-- If necessary, remove the A/C compressor from the bracket and tilt the front downward. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .

Refer to MECHANICALLY-DRIVEN A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET, VEHICLES WITH 4-CYLINDER TFSI ENGINE
Refer to MECHANICALLY-DRIVEN A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET, VEHICLES WITH 6-CYLINDER ENGINE
Refer to MECHANICALLY-DRIVEN A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET, VEHICLES WITH 8-CYLINDER TDI ENGINE