BELT PULLEY (WITHOUT A/C Clutch -N25-), REMOVING AND INSTALLING, "Denso" VERSION "1": Notes

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Information about replacing the belt pulley -E-. Refer to OVERVIEW - A/C COMPRESSOR BELT PULLEY, "Denso" VERSION "1" .

Fig 1: Identifying Belt Pulley Components, Denso Version 3
Courtesy of AUDI OF AMERICA, LLC
The belt pulley is made of plastic and is sensitive to impact, therefore be especially careful when handling it.
If the drive plate overload protection -C- activates, rotate the pulley -E- using the outer part of the drive plate -C- without rotating the compressor shaft -B- and the hex head on the drive plate -D- (inner part of the drive plate -C-).