Line Routing And Securing

WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

There is a risk of damaging the lines.

The lines can be damaged by the moving or hot components.

-- Route the wires in the original cable guide.

-- Ensure sufficient clearance to moving or hot components.

Mark the individual fuel, hydraulic and vacuum lines, EVAP system as well as the wires before removing them. This will prevent interchanging them and will ensure the original installation position. Draw sketches or take pictures of them if required.
After securing the fuel and coolant lines and checking their routing, they must be inserted in their brackets and may not contact other components.