Radiator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .
Secure all hose connections with hose clamps that match the ones used in series production. Refer to the appropriate Electronic Parts Information.
Used coolant cannot be used again.

-- Connect the coolant hose and coolant connection with the connector coupling. Refer to Figure.

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .