Coolant Expansion Tank For Engine Coolant Circuit, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Guide the guide piece from the coolant expansion tank -2- with the grommet -3- in the bracket -4-.
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the appropriate Electronic Parts Information.
- Used coolant cannot be used again.
-- Connect the coolant hose to the connector coupling. Refer to Figure.
-- Vehicles without high-voltage system, check the coolant level. Refer to Coolant Level, Checking .
-- Vehicles with high-voltage system, drain and fill the coolant for the engine coolant circuit. Refer to COOLANT, DRAINING AND FILLING, VEHICLE WITH HIGH-VOLTAGE SYSTEM, ENGINE COOLANT CIRCUIT .