Front Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Replace the seal and O-ring after removal.
Secure all hose connections with hose clamps that match the ones used in series production. Refer to the appropriate Electronic Parts Information.
Used coolant cannot be used again.

-- Coat the O-ring with coolant and install it.

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Install the upper air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .