LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Cooling System (Servicing - 6-Cylinder 2.9L; 3.0L 4V TFSI Ea839 Engine)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Coolant Valves, Removing And Installing >> Coolant Shut-Off Valve, Removing And Installing, 3.0L Engine >> Removing

Coolant Shut-Off Valve, Removing And Installing, 3.0L Engine: Removing

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model, preliminary work may be required. Refer to COOLANT VALVES, REMOVING AND INSTALLING .

-- Remove the front coolant pipe. Refer to COOLANT PIPES, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the coolant shut-off valve -2-.

GWWA19-12528Courtesy of AUDI

-- Remove the vacuum hose -1- at the same time to not damage it.