LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Wiper System >> Wiper Blade, Removing And Installing >> Wiper Blade, Removing And Installing, Windshield Wipers With Integrated Washer Nozzles >> Installing

Wiper Blade, Removing And Installing, Windshield Wipers With Integrated Washer Nozzles: Installing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Guide the wiper blade -2- parallel into the windshield wiper arm -1- in direction of -arrow-.Make sure that the wiper blade is slid into the windshield wiper arm until the clip audibly engages.

GWWA92-10451Courtesy of AUDI

-- To leave the "service position", ither press the windshield wiper switch or drive faster than 6 km/h (3.7 mph).