Windshield Wiper Motor -V-, EMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the windshield wiper arms. Refer to WINDSHIELD WIPER ARMS, REMOVING AND INSTALLING .
-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Remove the expanding rivet -1-.
-- Pivot the filler neck -2- upward but do not remove the washer fluid reservoir and the body opening -3-.
-- Remove the bolts -1, 3 and 5-.
-- Remove the windshield wiper frame -2- with the linkage and remove the windshield wiper motor from the plenum chamber.
-- Disconnect the connector -4-.