Windshield Wiper Arms, Removing And Installing, From Product Improvement: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Pry the caps -arrows- off of the windshield wiper arms -1- with a screwdriver.
-- Remove the nuts -2-.
-- Position the hook -2- on the windshield wiper arm -1-.
-- Position the Puller - Windshield Wiper:T40394 on the opposite side of the windshield wiper arm and latch the pivoting hook -3-.
-- Push the locking ring -4- downward -arrow-.
-- Turn the bolt -5- clockwise until the windshield wiper arm is removed from the windshield wiper axle.
-- Remove the windshield wiper arms.