LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Washer Fluid Reservoir, Removing And Installing >> Washer Fluid Reservoir, Removing And Installing, From Product Improvement >> Installing

Washer Fluid Reservoir, Removing And Installing, From Product Improvement: Installing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
GWWN92-10869Courtesy of AUDI

Install in the reverse order of removal while noting the following:

-- Pay attention when inserting the washer fluid reservoir -1- that the securing tabs engage in the mounts -2 and 3-.

TIP:

To prevent mixing up washer fluid hose connections on the Windshield Washer Pump -V5-, he connections on the pump and the hose lines are color coded. Hose connector pieces must be connected to the corresponding colored pump connections during installation.