Washer Fluid Reservoir Filler Neck, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Place a drip tray under the washer fluid reservoir.
-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Remove the expanding rivet -1-.
-- Remove the filler neck -2- from the washer fluid reservoir and the body breakout -3- to the right side.