Washer Nozzle For Laser Distance Regulation Control Module, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .
-- Remove the upper air guide. Refer to the appropriate Cooling System article. .
-- Release the clamp on the washer fluid hose connecting piece -1-.
-- Remove the washer fluid hose from the washer nozzle -2-.
-- Remove the washer nozzle -2- on the cap -3- all the way forward from the radiator grille and hold it in this position.
-- Push the retaining tabs on the cap -3- apart in direction of -A arrows-.
-- Remove the cap -3- from the washer nozzle -2- in direction of -arrow B-
-- Remove the bolts -2-.
-- Remove the washer nozzle -1- forward in direction of -arrow-.