LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Headlamp Washer System >> Headlamp Washer System Pump -V11-, EMOVING AND INSTALLING >> Removing

Headlamp Washer System Pump -V11-, EMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
GWWA92-10348Courtesy of AUDI

-- Remove the washer fluid reservoir until the headlamp washer system pump is accessible. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .

-- Disconnect the connector -5-.

-- Place a drip tray under the washer fluid reservoir.

-- Press the release button -2- and remove the washer fluid hose -3- from the headlamp washer system pump -4-.

-- Remove the headlamp washer system pump upward and out of the washer fluid reservoir.