Wind Deflector, Removing And Installing, Fastening Pin Version With Fastener: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Release the fastener in the -direction of the arrow-.

Courtesy of AUDI

-- Pull the fastening pins -1- out slightly.

-- Remove the wind deflector -2- in the rear area downward from the transverse link.

-- Remove the wind deflector -2- together with the fastening pins -1-.