Upper Control Arm, Removing And Installing: Notes

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Vehicle Diagnostic Tester
Torque Wrench 1331 Insert - Ring Wrench - 16mm:V.A.G 1331/12

Fig 1: Torque Wrench 1331 Insert - Ring Wrench - 16mm
Courtesy of AUDI
Engine and Gearbox Jack:VAS 6931

Fig 2: Engine and Gearbox Jack VAS6931 or VAG1383A
Courtesy of AUDI
Support Device:VAS 6931/1 , not illustrated