Boot, Replacing: Installing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the shock absorber fork. Refer to SHOCK ABSORBER FORK, REMOVING AND INSTALLING .

-- Pay attention to the installation position of the boot. Refer to Figure.

Before tensioning clamps, make sure boot is not twisted.

-- Pay attention to the installation position of the air line clips and the clamp. Refer to Figure and Refer to Figure.

-- Clamp, Tensioning using Clamping Pliers:V.A.G 1682A . Refer to Figure.