Overview - Seat Pan Cover And Cushion, Seat With Seat Depth Adjuster

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI

Seat Pan
- With a seat depth adjuster
Seat Bolster Cushion
- Removing and Installing. Refer to SEAT BOLSTER CUSHION ON SEAT PAN, REMOVING AND INSTALLING, SEAT WITH SEAT DEPTH ADJUSTER .
Catch
- On the seat depth adjuster cover
- Quantity: 4
Clamping Strip
- For attaching the cover and seat cushion to the seat depth adjuster cover
- Sewn into cover
Cover
- Check that there are no folds after installing
- Cover with Seat Cushion, Removing and Installing. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, SEAT WITH SEAT DEPTH ADJUSTER .
- Cover and Seat Cushion, Disconnecting. Refer to SEAT PAN COVER AND CUSHION, SEPARATING .
Molding
- Sewn into cover
- For engaging the cover on the seat pan
- Check for proper seating
Tab
- With hook
- Sewn into cover
- For engaging the cover on the seat pan
Rubber Band
- Quantity: 2
- Pushed into the cover mounting pocket
- for attaching to the seat depth adjuster
Upholstery Clip
- For attaching the cover to the seat cushion
- Replace after removing.
- Install at the same location with Upholstery Clip Pliers:VAG1634 .
Cushion
- Cover with Cushion, Removing and Installing. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, SEAT WITH SEAT DEPTH ADJUSTER .
- Cover and Seat Cushion, Disconnecting. Refer to SEAT PAN COVER AND CUSHION, SEPARATING .
Seat Bolster Cushion
- Removing and Installing. Refer to SEAT BOLSTER CUSHION ON SEAT PAN, REMOVING AND INSTALLING, SEAT WITH SEAT DEPTH ADJUSTER .