Overview - Seat Position Sensor
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Wiring Harness
- For the seat position sensor/passenger occupant detection sensor/seat belt switch
- Clipped in the seat pan
- Black connector, connector station in the underbody under the seat
- Removing and Installing. Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING .
- Passenger Seat Occupant Detection Sensor -G128-
- Only the front passenger side
- Removing and Installing. Refer to Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING .
- Passenger Occupant Detection Sensor Bracket
- Clipped in the seat pan
- Removing and Installing. Refer to Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING .
- Connector Coupling
- For the Seat Belt Latch
- Seat Rail
- Tunnel-side
- Seat Position Sensor
- Driver Seat Position Sensor -G553-
- Front Passenger Seat Position Sensor -G554-
- Shown on the front passenger side
- Check using the Vehicle Diagnostic Tester.
- Removing, installing and adjusting. Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING
- Bolt
- 1.6 Nm