Seat Belt Height Adjuster, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the seat belt height adjuster slider to the lowest position.
-- Remove the B-pillar upper trim panel. Refer to B-PILLAR UPPER TRIM PANEL, REMOVING AND INSTALLING .
-- Set aside the B-pillar trim panel with the seat belt webbing to the side.
-- Remove the bolt -4-.
-- Remove the seat belt relay -1- with the seat belt webbing.
-- Remove the bolt -3-.
-- Remove the seat belt height adjuster -2- upward from the B-pillar.