Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front passenger all the way back to the highest position.

-- Disconnect the connector -2- for the passenger occupant detection sensor.

Courtesy of AUDI

-- Unclip the mount -1- from the seat pan -arrows- and remove the passenger occupant detection sensor -3-.