Passenger Occupant Detection System, Removing And Installing: Notes
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- The passenger occupant detection system is only installed in the passenger seat.
- The service kit for the passenger occupant detection system must always be installed completely.
- This means that the components that belong together from the passenger occupant detection system service kit (Passenger Occupant Detection System Control Module -J706- and Front Passenger Occupant Detection Sensor -G128-) must always be installed.
- Exchanging of a component Passenger Occupant Detection System Control Module - J706- or Front Passenger Occupant Detection Sensor -G128- with another vehicle is not permitted.
- The parts of the service kit are different depending on the seat version. Refer to the appropriate Parts Information.
Special tools and workshop equipment required
- Pry Lever:80-200