Airbag Control Module -J234-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
-- Disconnect the battery ground cable when the ignition is turned on. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the center console support or center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
-- Remove the nuts -arrows-.
CAUTION:
Pyrotechnical components can deploy unintentionally.
There is a risk of injury.
- Discharge static electricity by briefly touching the door striker.
-- Carefully lift the airbag control module -1- from the threaded pins and remove it.
-- Disconnect the connectors -2 and 3- by releasing the connector safety catch and securing clip on the connector.