Glove Compartment Handle, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Release the hooks -2- for the glove compartment handle -arrow A- through the opening on the side on the glove compartment lid with a small screwdriver -1- (approximately 70 mm long) or Torx screwdriver T10 (approximately 80 mm long).
-- Carefully disengage the glove compartment handle -3- at the same time with the :80-200 from the hooks -arrow B-.
-- Press the glove compartment handle and release retaining the hook -1- at the side of the glove compartment opener using a screwdriver.
-- Pry up the glove compartment handle -2- carefully from the glove compartment lid -arrow- with the : 80-200 .