Roof Grab Handle, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Improper handling increases the risk of destroying the roof grab handle.
It is possible that the silicone brake and spring fall out.
- Unclip the expanding cap only to the lock position.
-- Insert the angled screwdriver -4- in the gap behind the expanding cap -2-.
-- Pivot the angled screwdriver -arrow-, until the expanding cap slides audibly into the lock position.
-- Repeat the procedure on the second expanding cap -3-.
-- Remove the roof grab handle -1- from the opening in the body.
-- Leave the expanding caps in the lock position in the roof grab handle.