Overview - Luggage Compartment Roll Cover
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 3.5 Nm
- Roll Cover Guide Rail
- Available only together with -item 18-
- Removing and Installing. Refer to LUGGAGE COMPARTMENT COVER MOTOR, REMOVING AND INSTALLING .
- Bolt
- 3.5 Nm
- Bolt
- 3.5 Nm
- Left Bracket
- under the luggage compartment side trim panel
- Removing and Installing. Refer to ROLL COVER BRACKET, REMOVING AND INSTALLING .
- Rivet
- Quantity: 3
- Luggage Compartment Roll Cover
- Nut
- Quantity: 2
- 3.5 Nm
- Right Bracket
- under the luggage compartment side trim panel
- Removing and Installing. Refer to ROLL COVER BRACKET, REMOVING AND INSTALLING .
- Frame
- For luggage compartment roll cover handle
- Not available separately. Refer to the appropriate Parts Information for the repair kit.
- Replacing. Refer to LUGGAGE COMPARTMENT ROLL COVER HANDLE, REMOVING AND INSTALLING .
- Handle
- For luggage compartment roll cover
- Not available separately. Refer to the appropriate Parts Information for the repair kit.
- Replacing. Refer to LUGGAGE COMPARTMENT ROLL COVER HANDLE, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- thread cutting
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
- 0.35 Nm
- Rivet
- Locking Pin
- Not available separately. Refer to the appropriate Parts Information for the repair kit.
- Riveted with roll cover
- Roll Cover Catch
- Clipped into the guide rails
- Removing and Installing. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
- Nut
- 3.5 Nm
- Nut
- Quantity: 2
- 3.5 Nm
- Luggage Compartment Cover Motor 1 -V473-
- Available only together with -item 2-
- Removing and Installing. Refer to LUGGAGE COMPARTMENT COVER MOTOR, REMOVING AND INSTALLING .