Overview - Bench Seat/Single Seats, Seat Frame High, Outer Second Row
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Release Cable
- For seat folding release
- Removing and Installing. Refer to RELEASE CABLE FOR SEAT FOLDING RELEASE, REMOVING AND INSTALLING, SEAT HIGH, OUTER SECOND ROW .
- Lock Washer
- Front Mount
- For seat frame
- Spiral Spring
- Locking Mechanism
- For seat frame
- Pin
- Lock Washer
- Pin
- Front Mount
- For seat frame
- Seat/Backrest Frame
- Rear Mount
- For seat frame
- Quantity: 2
- Bolt
- Self-locking
- Replace after removing.
- 25 Nm
- Bolt
- Self-locking
- Replace after removing.
- Seat Rail
- Nut
- 2.9 Nm
- Spiral Spring
- For release lever
- Lever
- For seat folding release
- Mount
- For the seat rail
- Nut
- Self-locking
- Replace after removing.
- 25 Nm
- Gas-Filled Strut
- For seat folding release
- Press onto ball pin and engage.
- Removing and Installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING, SEAT HIGH, OUTER SECOND ROW .
- Ball Pin
- Welded on to the seat frame
- Rear Seat Backrest Contact Switch
- Left Rear Seat Backrest Contact Switch -F315-, Right Rear Seat Backrest Contact Switch -F316-
- Removing and Installing. Refer to REAR SEAT BACKREST CONTACT SWITCH, REMOVING AND INSTALLING, SEAT HIGH, OUTER SECOND ROW .
- Bolt
- 2.9 Nm