LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Bench Seat/Single Seat, Removing And Installing >> Third Row Seat, Removing And Installing >> Removing

Third Row Seat, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the second row seats into the forwardmost position.

-- Fold the outer second row seats forward.

-- Remove the guide for the lower child seat anchor. Refer to LOWER CHILD SEAT ANCHOR GUIDE, REMOVING AND INSTALLING, SECOND AND THIRD ROW .

-- Grasp with both hands on one side under the seat cushion frame.

GWWA72-12120Courtesy of AUDI

-- Pull the seat cushion -1- up forcefully with both hands -arrow A- so the wire hooks -2- on the seat cushion frame release from the mounting grommet -3-.

-- Repeat the procedure on the opposite side -arrow B-.

-- Disengage the seat cushion from the seat frame and remove from the vehicle.

-- Disconnect the connectors -1, 2 and 3- by releasing the catch.

GWWA72-12137Courtesy of AUDI

-- Repeat this procedure on the opposite side.

-- Remove the luggage compartment floor bracket. Refer to LUGGAGE COMPARTMENT CARPET BRACKET, REMOVING AND INSTALLING .

-- Remove the bolts -1 and 2-.

GWWA72-12121Courtesy of AUDI

TIP:

A second technician is required to remove the seat frame -3-.

-- To protect the rear bumper before prying out the seat frame, install the :VAS871 001  as shown.

GWWA72-12171Courtesy of AUDI

-- With the help of a second technician, lift the seat frame out of the vehicle toward the rear through the lid opening.