Seat Low, Removing And Installing, Outer Second Row: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the battery ground cable when the ignition is turned on. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Move the front seats all the way forward.

-- Remove the seat cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, SECOND ROW SEAT PAN LOW .

-- Remove the stand support trim panel on the side sill side. Refer to STAND SUPPORT FRONT TRIM PANEL ON SIDE SILL SIDE, REMOVING AND INSTALLING, SEAT LOW, OUTER SECOND ROW .

-- Remove the stand support trim panel on the tunnel side. Refer to TUNNEL-SIDE STAND SUPPORT TRIM PANEL, REMOVING AND INSTALLING, SEAT LOW, SECOND ROW .

-- Release and disconnect the connectors on the connector station.

-- Connect the :VAS6282 to the thorax airbag harness connector. Refer to AIRBAG ADAPTER, CONNECTING AND DISCONNECTING .

-- Remove the bolts -arrows-.

Courtesy of AUDI

-- To protect the sill panel before prying out the rear seat, attach the :VAS871 001 as shown.

Courtesy of AUDI

-- Remove the seat from the vehicle with a second technician.