Seat Low, Removing And Installing, Center Second Row: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seats all the way forward.
-- Remove the seat cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, SECOND ROW SEAT PAN LOW .
-- Remove the stand support trim panels on the tunnel side. Refer to TUNNEL-SIDE STAND SUPPORT TRIM PANEL, REMOVING AND INSTALLING, SEAT LOW, SECOND ROW .
-- Release, disconnect and free up the connector -5- for the Center Second Row Seat Belt Switch -F391-.
- Ignore the other -items-.
-- Remove the bolts -arrows-.
-- Fold the backrests forward.
-- To protect the sill panel before prying out the rear seat, attach the :VAS871 001 as shown.
-- Remove the seat from the vehicle with a second technician.