Seat High, Removing And Installing, Center Second Row: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seats all the way forward.

-- Slide seat toward rear.

-- Remove the hinge trim panel on the tunnel side. Refer to TUNNEL-SIDE HINGE TRIM PANEL, REMOVING AND INSTALLING, SEAT HIGH, OUTER SECOND ROW .

-- Release, disconnect and free up the connector -5- for the Center Second Row Seat Belt Switch -F391-.

Courtesy of AUDI

Ignore the other -items-.

-- Remove the bolts -arrows-.

Courtesy of AUDI

-- Fold the backrests of the outer seats forward and fold the seats forward.

-- Push seat forward.

Courtesy of AUDI

-- Fold the backrest forward.

-- Remove the left and right seat rail trim panel. Refer to SEAT RAIL TRIM PANEL, REMOVING AND INSTALLING, SEAT HIGH, CENTER SECOND ROW .

-- Remove the bolts -arrows-.

-- To protect the sill panel before prying out the rear seat, attach the :VAS871 001 as shown.

Courtesy of AUDI

-- Remove the seat from the vehicle with a second technician.