Upper Center Seat Rail Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat into its highest position.
-- Remove the seat side trim on the side sill side. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .
-- Remove the threaded pin -3- and remove the expanding clip -2- from the upper center seat rail cover -1-.
-- Release the rear hook at the inside of the seat rail -arrow-, and lift up the rear cover slightly.
-- Release the upper center seat rail cover by sliding in the direction of travel, and remove it.