LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Seat Pan, Disassembling And Assembling >> Seat Side Trim/Control Module/Compressor Bracket, Removing And Installing >> Installing

Seat Side Trim/Control Module/Compressor Bracket, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Insert the bracket for the front trim -arrows-. When doing this, make sure the tabs -1- fit into the brackets -2, 3 and 4-.

GWWA72-12016Courtesy of AUDI

Further installation is the reverse order of removal.

scientia non olet · About LEMON Manuals