Seat Side Trim On Tunnel Side, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Unscrew the front seat and tip forward with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Release the backrest cover tension bands -arrow- at the bottom of the seat pan.
-- Remove the expanding rivet -1-.
-- Press down the tab -arrow- at the inside of the seat rail.
-- Remove the seat side trim on the tunnel side -2-.